The Current Position:Home>>News>>Brief Introduction
Fault handling of jaw crusher
Time 2013-09-23 Author Website Manager Browse QQmessage 产品咨询 Tel:0086-371-55611696

Fault handling of jaw crusher

Fault handling of jaw crusher
 
 

There is always something wrong with jaw crusher on operation. Now,Songling will share our experiences in dealing with problems which occurs daily.


Jaw crusher faults

   
1.The fly wheelrotates,but the movable jaw is not working
    2.The toothed plate looses,causing a metal hit
    3.The granularity becomes coarse
    4.The bearing mat of distance rod clashes.
    5.The spring fractures


 

The cause and the solution

   1.To change distance rods;to repair the connecting rod;to replace the bad spring.
   2.To fasten or change the screws or the side coupling plank
   3.To turn around the tooth plate or adjust the discharging opening
   4.To adjust or change the spring;to fasten or maintain the bearing seat.
   5.When we turn down the discharging opening,we're supposed to loosen the spring first,then fasten the pull-rod nut properly after adjustment.

Copyright © 2010GONGYI CITY SONGLING MINING MACHINERY CO.,LTD.
Tel: 0086-371-55611752 E-mail: hnyhjx@hotmail.com MapXml
Call me!Jenny