The Current Position:Home>>Products>>Brief Introduction

Gangue crusher

1.The introduction of gangue crusher
 The double rotor ultra-fine crusher developed by Xingyang Ju Xin machinery Co.,Ltd. is widely used for crushing calcite,limestone ,the cinder brick ,slag ,shale,gangue ,construction waste and so on . This solved the problems of using gangue and cinder as brick adding material ,in fuel and using waste rock ,shale to produce standard brick,hollow brick material humidty for crushing .The double rotor ultra-fine crusher equal to two jaw crushers and this two parts combine together reasonably ,. Two sets of rotors used in tandem model .
 
 
2.Working principle of gangue crusher
When working , the double motors drive the two sets of rotors in tandem to do a high-speed rotating at the same time .The material inside the plane cavity are crushed by the higher rotor and recrushed immediately by the lower rotor with rapid rotation .The material inside the plane cavity have mutual rapid collision and mutual shattered to get hammer powder .The effect of the powder formed cinders particles with the discharge size less than 3mm. The particles can meet the tile factories’need for dieselling to make bricks .
 
3.Features of gangue crusher
1.It has a high overall efficiency .
2.output can be adjusted in all sizes from the impact of wearing parts .
3.round and spindle can use for a long time ,so do not have to replace the parts .
4.with advantages of high yield and low power consumption ,it can save more than 40%energy 
5.The system is not blocked and no card ,high performance security and not influenced by the rain
6.mainly used to crush the cinder ,slag .clay ,gangue ,construction waste etc .material in brick factory .
7.adopted super wear-resistant composite materials, its life is several times the traditional equipment .
8.with multi-channel discharge ,the system is high yield ,effective dust and not need dust collection dust
9.high yield ,low noise ,big reduction ratio ,solving the problem of rubbing between hammer and lining of traditional crusher .

 

 

 

 

 

4.Technical Parameters of gangue crusher

Model
SCF600×400
SCF600×600
SCF800×600
SCF800×1000
Feed Size(mm)
≤100
≤150
≤200
≤260
Discharge Size(mm)
≤3(over 90% is less than 2mm)
≤3(over 90% is less than 2mm)
≤3(over 90% is less than 2mm)
≤3(over 90% is less than 2mm)
Capacity(t/h)
15-25
25- 40
50-70
100-150
Motor Power(kw)
18.5+22
22+22
37+45
75+55
Overall Size(mm)
2665×725×1698
2760x1280x1750
3625×1314×2065
4500x1700x3150

 

Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.

 

Call me!Jenny
Copyright © 2010GONGYI CITY SONGLING MINING MACHINERY CO.,LTD.
Tel: 0086-371-55611752 E-mail: hnyhjx@hotmail.com MapXml
Call me!Jenny