Hammer crusher
1.Introduction of hammer crusher
The series of hammer crushers breaks the materials by the collision the high-speed rotating hammer block and the colliding surface of the materials.
It is a kind of crusher which can break the materials with max particle size of 600-18000mm into the materials with 25mm or below 25mm.
2.Application of hammer crusher
Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum,
bricks, tiles, limestone, glass, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos
fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher.
3.Features of hammer crusher
Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and
light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more
metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop
because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%.
4.Technical parameters of hammer crusher
Type
|
Model
|
Feed size
(mm) |
Discharge
Size(mm) |
Capacity
(m3/h) |
Motor
|
Weight(t)
|
Overall Size
( L*W×*H )(mm) |
|
Number of Poles
|
Power(kw)
|
|||||||
Hammer Crusher
|
PCΦ400×300
|
≤200
|
≤25
|
5-10
|
4
|
11
|
0.8
|
900×670×860
|
PCΦ600×400
|
≤250
|
≤30
|
10-22
|
4
|
22
|
1.5
|
1200×1050×1200
|
|
PCΦ800×600
|
≤250
|
≤25
|
18-40
|
4
|
55
|
3.8
|
1310×1180×1310
|
|
PCΦ1000×800
|
≤350
|
≤35
|
25-50
|
4
|
75
|
4.9
|
1600×1390×1575
|
|
PCΦ1000×1000
|
≤300
|
≤35
|
30-55
|
6
|
132
|
8
|
1800×1590×1775
|
|
PCΦ1250×1250
|
≤350
|
≤35
|
35-65
|
6
|
180
|
14
|
2060×1600×1890
|
|
PCΦ1400×1400
|
≤350
|
≤35
|
50-100
|
6
|
280
|
32
|
2365×1870×2220
|
|
PCΦ1600×1600
|
≤350
|
≤35
|
100-150
|
8
|
480
|
37.5
|
3050×2850×2800
|
Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.
- Introduction of gold trommel machine
- Mill balls and water influence the effic
- Fault handling of jaw crusher
- process of Stone Aggregates produced by
- How to maintain ball mill with the lubri
- China mining machinery need technology i
- How to choose jaw crusher--let me help y
- Domestic Mining Machinery Trends brief a
- The future development trends and prospe
- The development of ball miller feeding
- Songling advise for the purchase skills
- Mining mechanization hot ascension of Mi
- The property of Flotation Machine
- The Most Important Factor in the Process
- Obvious advantages of ball mill
- Environmental Protection Idea must be st
- The Benefits of central bank cutting int
- Stone production industry promote the c
- The future of the drying equipment in Ch
- Rock Crusher Maintenance