Cone crusher
Components of cone crusher
Cone crusher mainly consists of frame, horizontal axis, cone brake, balance wheel, eccentric sleeve, upper crushing wall (welding cone), down crushing wall (movable cone), fluid coupling, lubricating system, hydraulic system and control system.
Applications of cone crusher
Cone crusher is a kind of crushing machine commonly used in mining, metallurgical industry, construction, road construction and chemical industry.
Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.
Working principle of cone crusher
Cone crusher crushes materials by the working surface between the moveable cone anfd fixed cone.So it is more advanced and efficiency efficient than jaw crusher.The moveable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve,and the sleeve is set on the stopping and pushing bearing.The moveable cone and erect shaft are driven by the eccentric shaft sleeve together.The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear,and the wheel of the conveyor belt is driven by motor through V-belts.The lower part of vertical shaft is installed in the eccentric sleeve.When the eccentric sleeve ratates,there is a conical surface lined out by the shaft.When the moveable cone comes near the fixed cone,rocks are grinded into pieces,when the moveable cone leaves,grinded material is discharged from the discharge hole.The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole,consequently the output size is determined adjusted.
Technical of cone crusher
Cone Diameter
(mm)
Max Feed Length (mm)
Discharge Width
(mm)
Capacity
(t/h)
Motor Power
(kw)
Weight
(t)
Overall Size
(L×W×H)
(mm)
PYB-900TC
900
150
25-38
115-160
75
11.86
2430×1770×2200
PYB-900C
900
150
13-38
60-160
75
11.85
2430×1770×2200
PYB-900X
900
85
9-22
45-90
75
11.93
2430×1770×2200
PYD-900C
900
85
6-19
60-130
75
12.15
2430×1770×2200
PYD-900Z
900
65
3-16
25-100
75
12.13
2430×1770×2200
PYD-900X
900
35
3-13
25-90
75
12.05
2430×1770×2200
PYB-1300TC
1300
220
25-50
230-350
160
22.5
2890×2250×2710
PYB-1300C
1300
205
19-50
170-340
160
22.5
2890×2250×2710
PYB-1300Z
1300
175
16-38
130-250
160
22.5
2890×2250×2710
Components of cone crusher
Cone crusher mainly consists of frame, horizontal axis, cone brake, balance wheel, eccentric sleeve, upper crushing wall (welding cone), down crushing wall (movable cone), fluid coupling, lubricating system, hydraulic system and control system.
Applications of cone crusher
Cone crusher is a kind of crushing machine commonly used in mining, metallurgical industry, construction, road construction and chemical industry.
Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.
Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.
Working principle of cone crusher
Cone crusher crushes materials by the working surface between the moveable cone anfd fixed cone.So it is more advanced and efficiency efficient than jaw crusher.The moveable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve,and the sleeve is set on the stopping and pushing bearing.The moveable cone and erect shaft are driven by the eccentric shaft sleeve together.The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear,and the wheel of the conveyor belt is driven by motor through V-belts.The lower part of vertical shaft is installed in the eccentric sleeve.When the eccentric sleeve ratates,there is a conical surface lined out by the shaft.When the moveable cone comes near the fixed cone,rocks are grinded into pieces,when the moveable cone leaves,grinded material is discharged from the discharge hole.The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole,consequently the output size is determined adjusted.
Technical of cone crusher
|
Cone Diameter
(mm) |
Max Feed Length (mm)
|
Discharge Width
(mm) |
Capacity
(t/h) |
Motor Power
(kw) |
Weight
(t) |
Overall Size
(L×W×H) (mm) |
|
|
PYB-900TC
|
900
|
150
|
25-38
|
115-160
|
75
|
11.86
|
2430×1770×2200
|
|
PYB-900C
|
900
|
150
|
13-38
|
60-160
|
75
|
11.85
|
2430×1770×2200
|
|
PYB-900X
|
900
|
85
|
9-22
|
45-90
|
75
|
11.93
|
2430×1770×2200
|
|
PYD-900C
|
900
|
85
|
6-19
|
60-130
|
75
|
12.15
|
2430×1770×2200
|
|
PYD-900Z
|
900
|
65
|
3-16
|
25-100
|
75
|
12.13
|
2430×1770×2200
|
|
PYD-900X
|
900
|
35
|
3-13
|
25-90
|
75
|
12.05
|
2430×1770×2200
|
|
PYB-1300TC
|
1300
|
220
|
25-50
|
230-350
|
160
|
22.5
|
2890×2250×2710
|
|
PYB-1300C
|
1300
|
205
|
19-50
|
170-340
|
160
|
22.5
|
2890×2250×2710
|
|
PYB-1300Z
|
1300
|
175
|
16-38
|
130-250
|
160
|
22.5
|
2890×2250×2710
|
Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.
- Introduction of gold trommel machine
- Mill balls and water influence the effic
- Fault handling of jaw crusher
- process of Stone Aggregates produced by
- How to maintain ball mill with the lubri
- China mining machinery need technology i
- How to choose jaw crusher--let me help y
- Domestic Mining Machinery Trends brief a
- The future development trends and prospe
- The development of ball miller feeding
- Songling advise for the purchase skills
- Mining mechanization hot ascension of Mi
- The property of Flotation Machine
- The Most Important Factor in the Process
- Obvious advantages of ball mill
- Environmental Protection Idea must be st
- The Benefits of central bank cutting int
- Stone production industry promote the c
- The future of the drying equipment in Ch
- Rock Crusher Maintenance
